2.Export Vietnam ERW60 Pipe production line

- Jan 19, 2017 -

2.Export Vietnam ERW60 Pipe production line

{Steel Tape}→→ Double-head un-coiler →→Strip-head Cutter and welder→→

Cage loop→→Forming section(Flattening unit +Main driving unit +Forming unit +Guide unit +High frequency induction welding unit +squeeze roller)+ De-burr frame →→Cooling unit →→ Sizing unit and straightener →→Flying saw under computer-control →→ Run-out table

3. Basic conditions:

a. Round Pipe: Φ15-Φ60.3mm

b. Pipe Thickness: 0.7– 3.5mm

c. Square Pipe: 12X12mm –40X40mm

d. Rectangle pipe: 10x14mm-30x60mm

e. Pipe Thickness: 0.7–3.0mm

Ø Steel Tape Specification

Material: Low Carbon steel & Galvanized steel

(δb≤500Mpa, δs≤235Mpa)

Steel Tape: Inner diameter: Φ470-Φ510mm

Outer diameter: Φmax=1500mm

Strip steel width: 48mm-180mm

Strip steel thickness: 0.7mm-3.5mm

The maximum weight: 2.0tons


Dynamic power: AC380V±10%, 3phases, 50Hz±1.0%

Control Power: AC220V±10%, one phase,50 Hz ±1.0%

Electric installed capacity: Appro. 500KW

Cooling water

Reservoir for High Frequency equipment: 25m³, one set

Reservoir for circulating cooling water: 25m³, one set

Compressed air

Pressure: 0.4Mpa

Flow: 1.0m3/min

Production capacity

Annual output: 20,000 ton,

According to the yearly working days、daily working hours and the products.

Line speed: 10-90m/min

Size of the whole line: Appro. 50X6m

Related Products