4. Export Mauritius HG127 Tube Mill

- Jan 19, 2017 -

4. Export Mauritius HG127 Tube Mill

{SteelTape}→→ Double-head un-coiler →→Strip-head Cutter and welder→→

Spiral Accumulator→→Forming section(Flattening unit +Main driving unit +Forming unit +Guide unit +High frequency induction welding unit +squeeze roller)+ De-burr frame →→Cooling unit →→ Sizing unit and straightener →→Flying saw under computer-control →→ Run-out table

Basic conditions:

a) Steel Pipe Specification

1. Pipe diameter: Ø25.4–Ø133mm

Pipe Thickness: 0.8– 5.5mm

2. Square Pipe: 20X20mm –78X78mm

Rectangle Pipe: 20X40mm –50X130mm

Pipe Thickness: 1.0– 3.0mm

3. Pipe Length: 6.0m – 12m

4. Length Tolerance: 0-4mm

b) SteelTape Specification

1. Material: Low Carbon steel(δb≤500Mpa, δs≤235Mpa)

2. Steel Tape: Inner diameter: Φ470-600mm

Outer diameter: Φmax=1900mm

Strip steel width: 160mm-700mm

Strip steel thickness: 0.8–5.5mm

The maximum weight: 6 tons

c) Electricity

1. Dynamic power: AC380V±10%, 3phases, 50Hz±1.0%

2. Control Power: AC220V±10%, one phase, 50 Hz ±1.0%

d) Electric installed capacity: appro. 550KW

e) Cooling water

1. Reservoir for High Frequency equipment: 20 m³, one set

2. Reservoir for circulating cooling water: 15 m³, one set

f) Compressed air

1. Pressure: 0.4Mpa

2. Flow: 1.0m3/h

g) Production capacity

Annual output: 45000 ton, according to the yearly working days、daily working hours and the products.

h) Line speed20-70m/min 


Related Products