High Degree Of Automation Of Longitudinal Shear Line

- Sep 13, 2017 -


Longitudinal shear line is also called Slitting unit, slitting machine, cutting machine, scissors. Mainly used for tinplate, galvanized iron, silicon Steel, cold-rolled strip, stainless steel belt, aluminum strip, steel strip and other roll material slitting. is to cut the metal coil into the required various widths of the strip, and then the production of small volumes for the next operation, is the transformer, Slitting Line the motor industry and other metal strip precision cutting equipment necessary.

longitudinal shear line by the discharge machine, coarse school machine, precision school machine, slitting machine (two units), receiving machine, Slitting Line automatic straightening system composition. The electrical configuration of the slitting line is configured according to the requirements of the drawing shears. The unwinding machine and rewinding machine adopt single supporting structure with good rigidity and high quality for easy unwinding. The machine can load 0-15 tons.

The longitudinal shear line is used to roll the metal plate through the unwinding, slitting, Slitting Line and rewinding the width of the coils required for several rolls. Suitable for processing cold-rolled plate, hot-rolled plate, galvanized plate, aluminum plate, stainless steel plate, color coated plate and surface coated metal coil plate.

The entire longitudinal shear line uses the PLC centralism controller, Slitting Line the Man-machine interface display, the automation degree is high, the operation is simple and reliable.

longitudinal shear Line Performance Characteristics:

longitudinal shear line is from the feeding trolley, unwinding, feeding, disc blade slitting machine, damping prescaler material, rewinding unit, unloading trolley, control system and so on.

The main function of the longitudinal shear line is to cut the width of the metal roll along the length of the strip to a number of required widths.

For rolling, blanking, cold bending molding, stamping and other processes to prepare blanks.

By adjusting the distance between the upper and the knife axes to accommodate the different thickness of the plate.

Replacement of different specifications of the blade ring, separate sleeve, Slitting Line can be cut into different widths of the strip.

The problems needing attention during the installation of longitudinal shear line:

1. The longitudinal shear line after electrify should be careful, if the installation of abnormal anti-inflammatory drugs immediately stop, and appropriate treatment

2. Non-staff members are prohibited from running near facilities

3. Longitudinal shear line can not be reversed

4. When the facility is running, Slitting Line no one can cross the rotating sheets

5. Each time before the knife, Slitting Line you must use gasoline to clean the tool and the upper and lower axes

6. To regularly check all fastening bolts are loose and take appropriate measures


Related Products