High Production Capacity Of Pipe Mill

- Sep 13, 2017 -

Pipe Mill is used in building materials industry in the grinding of various grades of cement clinker and fired cement raw materials, one of the main equipment, with simple structure, strong adaptability to the material, large production capacity, crushing ratio and other characteristics.

As a result of grinding process and grinding different, I plant products have dry method, wet method, dry and wet general and other structures of a variety of pipe mill for users to choose from. Tube Mill In order to meet user requirements, in recent years, I plant the use of a fully enclosed self-aligning main bearings. The bearing has a hydrostatic structure and is lubricated with a high and low pressure oil station. The Tube mill barrel is lined with ladder liner and angular spiral liner. The quality of the liner is high chromium cast iron, Tube Mill which can improve the production efficiency and reduce the consumption of energy and abrasive body.

The remarkable characteristic of the Tube mill is that the barrel length is much larger than the cylinder diameter, and usually the l/d=2 $number. Because the barrel is very long, Tube Mill so the material in the barrel of the grinding time is also long, you can get very fine grinding minerals. When the drum body of the mill is divided into two or three or four different lengths of chamber, it is called Docan (chamber) Tube mill. Tube Mill Multi-warehouse tube mill is used in cement plant.

Widely used in building materials, metallurgy, mineral processing, power and chemical industry grinding cement and other materials. The pipe mill has the characteristics of large crushing ratio, large production capacity, strong adaptability to material, easy replacement of wear parts, pipe mill by transmission part, rotary part, main bearing, Tube Mill material inlet and outlet device, lubricating part.

Tube Mill Working principle:

In a tube mill, when the cylinder rotates at a certain speed at a horizontal axis, the media and raw materials installed in the cylinder under the action of centrifugal force and friction, as the cylinder reaches a certain height, when their own gravity is greater than the centrifugal force, they will be ejected from the wall of the cylinder or roll down, due to impact and crush the ore. At the same time, in the process of ball mill, Tube Mill the sliding movement between the grinding medium and the material also produces grinding effect. Tube Mill use: Pipe mill, cement mill coarse grinding room for metal ball or steel rod, the last fine grinding room with small ball or steel section, the ore-discharging method is generally lattice and overflow type, applicable to the cement industry.

Related Products