Pipe Mill To Meet The Needs Of Large-scale Production Enterprises

- Aug 01, 2017 -


The tube mill has the characteristics of large crushing ratio, large production capacity, strong adaptability to the material, easy to replace the wear parts. Tube Mill The tube mill is composed of the transmission part, the rotary part, the main bearing, the incoming and outgoing material device and the lubrication part.

The advantages of tube mill

① the physical properties of materials (such as particle size, moisture, hardness, etc.) fluctuations in the strong adaptability, and greater production capacity.

② crushing ratio (usually more than 300, ultra-fine grinding up to 1000 or more), Tube Mill the fineness of the product, and easy to adjust the grain gradation.

③ can adapt to different situations of the operation: dry work can also be wet operation, but also the drying and grinding two processes together at the same time operations; open grinding, but also closed-circuit grinding.

④ good sealing, can be negative pressure operation, Tube Mill the workplace without dust flying.

⑥ easy to large-scale, to meet the needs of large-scale production of modern enterprises.

Tube mill and short ball mill different places only in its length than the diameter of 2-7 times the material in the tube mill to go through a long time, the product fineness uniform, Tube Mill smashing relatively large. In fact, multi-warehouse tube mill than a single application of a wide range. In the multi-warehouse tube mill, the partition plate will be divided into a number of cylinder barrels in the warehouse, in each warehouse, according to the situation of fine grinding with the grinding material, so that the material fine grinding warehouse by phase, Tube Mill Thus achieving a higher grinding efficiency, its unit power production is also larger. Pipe mill is widely used in building materials, metallurgy, mineral processing, power and chemical industry grinding cement and other materials. The tube mill has a large crushing ratio, large production capacity, Tube Mill strong adaptability to the material, easy to replace the wear parts and so on. The main components of the mill are: cylinder, feeding section, discharge section, transmission and so on.

① the physical properties of materials (such as particle size, moisture, hardness, etc.) fluctuations in the strong adaptability, and greater production capacity.

② crushing ratio (usually more than 300, ultra-fine grinding up to 1000 or more), the fineness of the product, and easy to adjust the grain gradation.

③ can adapt to different situations of the operation: dry work can also be wet operation, but also the drying and grinding two processes together at the same time operations; open grinding, Tube Mill but also closed-circuit grinding.

④ good sealing, can be negative pressure operation, the workplace without dust flying.

⑥ easy to large-scale, to meet the needs of large-scale production of modern enterprises.


Related Products