The Working Principle Of The Slitter

- Sep 04, 2017 -



Slitter is a wide range of paper, mica tape or film cut into a number of narrow materials of mechanical equipment, cutting machine commonly used in papermaking machinery, wire and cable mica tape and printing and packaging machinery. Slitter is mainly used in: mica tape, paper, Slitter insulation materials and film cutting, especially suitable for narrow band (insulation materials, mica tape, film, etc.) cutting.

Slitter use scale

Slitting machine is a kind of equipment for longitudinal cutting of wide volume data, which is widely used in the following occupations:

1. This is also the mainstream products in the packaging equipment, packaging malls are often visible.

2. For the sub-leather, cloth, plastic, Slitter film and so on the required occupation.

3. For the sub-strip of metal such as the strip of steel, stainless steel, copper ... its primary for steel processing plant pod plan steel mall operators, rolling steel manufacturers, electrical occupations, cars, stamping parts.

Slitting machine is a wide range of paper, Slitter mica tape or film cut into a number of narrow materials of mechanical equipment, commonly used in papermaking machinery, wire and cable mica tape and printing and packaging machinery. Slitter main

To apply: mica tape, paper, Slitter insulation materials and film cutting, especially suitable for narrow band (insulating material, mica tape, film, etc.) cutting.

principle

1. Slotting machine to the whole volume or the entire raw materials for fixed length cutting processing, such as plastic packaging materials, packaging cartons, steel, film, leather, wood chips for cutting,

Use the fixed length of the cut control.

2. Slitting length can be set continuously, Slitter if the actual length of the cut error, easy to set the parameters of the way calibration.

3. Slitter cutting control is divided into static and dynamic cutting two: in the set length to reach the exact stop, and then static cutting, Slitter cutting and restart after the operation; in the set length

When arriving, the slitter signal is not stopped and the slitter is dynamically cut during the movement of the material.


Related Products